-
CompareSpot Werkes 2.1 V.O.C.Acrylic Urethane Clearcoat is an ultra productive clearcoat formulated for spot repair and 1-2 panel repair. This is a 4:1 mix ratio clearcoat can be sanded and buffed in 20-25 minutes air dry. MRS-8200 "Spot Werkes" 2,1 V.O.C. Acrylic Urethane Clearcoat is applied wet-on-wet with no flash time between coats. It can…
-
CompareMRS-80 is a direct to all metal primer surfacer that can be applied to bare substrates eliminating the pre-treatment primer step. It has excellent adhesion to cold rolled steel, aluminum, galvanized panels, galvaneal, body filler, fiberglass, SMC and OEM finishes. MRS-80 sands easily without loading the sandpaper. Its medium gray color and superior solvent resistance…
-
CompareChampagne Magnum is sand paper technology at it's best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper. Premium heat-treated grain extends life and gives a 30 - 50% faster cut rate Premium B-Weight latex paper backing improves performance, is more flexible and easier disc removal FEPA…
-
Compare3M™ Automotive Acrylic Plus Attachment Tape 06383 is a .045-inch thick, medium-density, black acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner. Acrylic Plus Attachment Tapes are OEM approved and are stronger, higher performing, high stress handling products than other automotive attachment tapes. Typical applications for 06383 would…
-
CompareEvercoat’s® easiest sanding body filler. The unsurpassed sanding qualities are attributed to Hattonite™, a unique ingredient which reduces heat and friction created by aggressive sanding. Rage Gold also contains ZNX-7® for adhesion to galvanized steel and aluminum. Plus, it’s stain resistant for use with basecoat/clearcoat paints. Part of the MetalWorks® System. Blue cream hardener included.
-
CompareDry sheets are a popular choice for sanding old paint, primer, primer surfacer and between color coats; also for deburring, removing sand scratches, shaping and finishing plastic filler and feather-edging repaired areas. Special coating prevents premature loading. Can be cut into halves or thirds to fit neatly on jitterbug sanders.
-
CompareTwo-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. Use with Premium Manual Applicator 200ml 08117, 3M Static Mixing Nozzle 08193. This product is also sold in our 400 ml size as SMC/FRP…
-
CompareFor Use on Metal, Wood, & Fiberglass Durable & Fast Drying Outstanding Coverage Ideal for Exterior Trim & Undercarriages 16 Oz Aerosol Can Detailed Description PROMAX is an excellent general purpose enamel for use on exterior and interior metal, wood and fiberglass. PROMAX is fast drying, durable and provides outstanding coverage. PROMAX CLEAR may be…
Trackbacks and pingbacks
No trackback or pingback available for this article.