-
CompareRS-789 Epoxy Primer is a fast dry, fast curing epoxy with excellent corrosion resistance and adhesion. This epoxy can be used on all properly prepared metals ands some plastics. RS-789 Epoxy Primer can be directly topcoated, wet-on-wet with any topcoat system. This 1:1 mix epoxy is available in quarts and gallons in three colors. (RS-780 gray,…
-
Compare3M™ Automotive Attachment Tape 06377 is a .030-inch thick gray acrylic foam tape with proven performance acrylic adhesive and a red release liner. 3M™ Automotive Attachment Tape 06377 is characterized by good peel and shear adhesion, good internal strength, good conformability and good plasticizer resistance. Typical applications would include the attachment of lightweight vehicle nameplates
-
CompareSelect Shade Dual Prime is a dual purpose high build specialty coating designed for priming and surfacing of metal and plastic parts. This primer helps prevent rust and seals out moisture while providing a base for topcoating. The RS-570 series boasts excellent .exibility and adhesion so it can be applied on both .exible and rigid…
-
CompareRS-788 Epoxy Primer is a fast dry, fast curing epoxy with excellent corrosion resistance and adhesion. This epoxy can be used on all properly prepared metals ands some plastics. RS-788 Epoxy Primer can be directly topcoated, wet-on-wet with any topcoat system. This 1:1 mix epoxy is available in quarts and gallons in three colors. (RS-780 gray, RS-788…
-
ComparePPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun. PPS™ replaces traditional mixing cups and filters and drastically reduces…
-
ComparePatterned, precise mineral structures give Trizact™ abrasives the combination of fast cut and consistent finish every time. Use P1000 foam blending discs for scuff sanding blend panels prior to painting. Use P1500 clearcoat sanding discs for leveling dust nibs and sanding of mismatched orange peel. Finally, use P3000 foam disc for removing P1200-P1500 grade sand…
Trackbacks and pingbacks
No trackback or pingback available for this article.