-
CompareFor dry sanding old paint, primer, primer surfacer, and between-color coats; also for deburring, removing sand scratches, shaping and finishing plastic filler, and featheredging repaired areas. Special No-Fil coating prevents premature loading. Can be cut into halves or thirds to fit neatly on jitterbug sanders. 100 discs per package. Price per package.
-
CompareIncludes the 3M™ Low Maintenance Half Facepiece 07026 (large), 1 pair organic vapor cartridges 07046, 1 pair filter retainers 07054, and 2 pairs of P-95 filters 07194. Lightweight, with a swept-back cartridge and filter design for unobstructed vision and excellent balance it is the benchmark in low maintenance respirators. With replaceable cartridges and filters, the…
-
CompareA flexible polyester glazing putty designed for spot filling and skim coating over repair areas on flexible bumpers and plastic parts. Its flowable viscosity is ideal for filling minor imperfections such as sand scratches, nicks, dings and gouges. Poly-Flex™ may also be used to skim coat over repair areas or large surface areas that have…
-
Compare3M™ Automotive Acrylic Plus Attachment Tape 06382 is a .045-inch thick, medium-density, black acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner. Acrylic Plus Attachment Tapes are OEM approved and are stronger, higher performing, high stress handling products than other automotive attachment tapes. Typical applications include body side…
-
CompareScotch® Performance Green Masking Tape 233+, 26338 is a highly-conformable tape that provides the best adhesive transfer resistance, hugs curves, contours and provides outstanding paint lines. Goes on quickly and easily, sticks at a touch and stays put. Perfectly balanced to give outstanding masking results.
-
CompareKit contains 50 disposable lids with 125 micron filters, 50 disposable liners, and 20 sealing plugs. The 125 micron filters are recommended for water borne paint or primer applications. Graduated measurement to 20.3 oz/600 mL when used with mix ratio film insert (mix ratio inserts sold separately). For use with part number 16001.
-
CompareFeatures: · 30% - 50% gains in cut rate, far less loading on the job and greater worklife. · Entirely new level of work speed is attainable. · Agressive sanding action isn`t easily dulled. · New anti-loading agent which actually throws dust from the grain as it cuts. · New latex-reinforced backing can withstand whatever…
Trackbacks and pingbacks
No trackback or pingback available for this article.